Project
Skip to content

Making 3D models · Beginner · 3 min

Blender for Beginners: The First 30 Minutes

Navigate the viewport, learn the six shortcuts that matter, model a simple object with extrude and modifiers, set millimetre units and export a clean STL or GLB.

By the 3DA.XYZ editorsUpdated 2026-11-05Original renders & data

Before you start

Blender is free and runs on Windows, macOS and Linux. Its interface is dense, but almost everything comes down to a few ideas: objects live in a scene, each object’s shape is a mesh you edit in Edit Mode, and modifiers change a mesh non-destructively.

Moving around the viewport

ActionMouseKeyboard
OrbitMiddle-dragNumpad 4/6/8/2
PanShift + middle-drag—
ZoomScrollNumpad + / −
Front / right / top view—Numpad 1 / 3 / 7
Frame the selection—Numpad . (period)

No middle mouse button or numpad? Enable Emulate 3 Button Mouse and Emulate Numpad in Edit → Preferences → Input.

The six shortcuts that matter

KeyDoesTip
GGrab (move)Then X, Y or Z to lock to an axis; type a number for an exact distance
RRotateR Z 90 Enter turns 90° about Z
SScaleS 2 Enter doubles the size
TabToggle Object / Edit ModeEdit Mode changes the mesh itself
EExtrudePulls new faces out of the selection
Shift + AAdd an objectMesh → Cube, Cylinder, UV Sphere…

In Edit Mode, keys 1, 2, 3 switch between vertex, edge and face selection. Ctrl + R adds an edge loop; X deletes; Ctrl + Z undoes.

Model a pencil cup in ten steps

  1. Delete the default cube (X), then Shift + A → Mesh → Cylinder.
  2. In the Adjust Last Operation panel, set Vertices to 6 for a hexagonal cup.
  3. Press S Z 1.5 Enter to make it taller.
  4. Tab into Edit Mode, press 3 for face select and click the top face.
  5. Press X → Faces to delete it — the cup is now open.
  6. Tab back to Object Mode. In the wrench tab (Modifiers), add Solidify and set Thickness to about 0.1 m (we fix units next).
  7. Add a Bevel modifier with a small amount and 2 segments to soften the edges.
  8. Apply the modifiers (Ctrl + A over each, or the modifier’s drop-down → Apply).
  9. Check the shape from Numpad 1, 3 and 7.
  10. Save the .blend file before exporting.

Compare with our hexagonal pencil cup, made by revolving a profile with only six segments.

Units for 3D printing

Blender’s default unit is the metre. For printing, open Scene Properties → Units, set Length to Millimeters and Unit Scale to 0.001. Now 1 Blender unit is 1 mm and exported STLs open at the right size in slicers. Always apply scale (Ctrl + A → Scale) before exporting, or the exported size may not match what you see.

Exporting

  • STL (printing): File → Export → STL. Check Selection Only if the scene has other objects.
  • glTF 2.0 (web, AR): File → Export → glTF 2.0, format glTF Binary (.glb). Blender writes metres and Y-up automatically.
  • OBJ: for other modeling programs; keep the .mtl and textures together.

Then drop the file into the 3D Studio to confirm the size and that it passes the edge checks.

Checks before printing

  • Mesh → Clean Up → Merge by Distance removes duplicate vertices left by modeling.
  • Mesh → Normals → Recalculate Outside fixes flipped faces (Normals and winding).
  • The 3D-Print Toolbox add-on reports non-manifold edges, thin walls and overhangs.
Try itExport your first Blender model and check it here: size, volume and holes, without uploading it. Check a Blender export →

Check your understanding

1. Which key extrudes faces in Edit Mode?

2. What should you do before exporting a scaled object?

3. For 3D printing in millimetres, what unit scale is commonly used?