Project
Skip to content

Original 3D model · Math & geometry · CC0

Cinquefoil knot

A (2, 5) torus knot: the tube winds twice around the axis and five times through the hole.

Render of the Cinquefoil knot
Rendered by the 3DA.XYZ viewport from the published 3MF.

Measured from the file

Size (X × Y × Z)
60.15 × 61.99 × 24 mm
Triangles
14,400
Unique vertices
7,200
Volume
5,024.5 mm³ (5.02 cm³)
Solid PLA mass
≈ 6.2 g if printed solid in PLA
Surface area
5,103.2 mm²
Euler characteristic
0
Mesh check
Watertight, consistently oriented

Tips and uses

  • A striking desk piece in silk filament.

Download in any format

The 3MF is the master file (millimetres, compressed, 174 KB, SHA-256 fba5c1c1ee64ca77…). Other formats are converted on your device from the same geometry:

3MF

How it was made

Generated by the open 3DA.XYZ generator with knot: kind = cinquefoil, size = 30, tube = 4, samples = 400, sides = 18. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.