Project
Skip to content

Original 3D model · CC0 · free download

30 mm hollow ring

A closed surface with a hole through it: Euler characteristic 0. Download it as STL, OBJ, GLB or 3MF, or open it in the browser.

Render of the 30 mm hollow ring with its triangle edges
Rendered by the 3DA.XYZ viewport from the published STL.

Measured from the files

Size (X × Y × Z)
30 × 30 × 6 mm
Triangles
512
Unique vertices
256
Volume
3,312.195 mm³
Surface area
1,933.112 mm²
Euler characteristic
0
Watertight
Yes — 0 open edges
All four formats agree
Yes

Every figure was read back from each of the four published files by the 3DA.XYZ mesh engine; all four agree. Geometry only — no physical print was tested.

What this model is for

A ring is watertight even though you can see through it — the hole is part of the shape, not a gap in the surface. Its Euler characteristic is 0 instead of 2, the signature of one handle (genus 1).

Try this

  • Check the mesh report: zero open edges, Euler characteristic 0.
  • Section it across X to see the tube’s cross-section.
  • Read watertight meshes.

Downloads

FormatFileSizeSHA-256View
STLhollow-ring-30mm.stl25,684 Bf390e9bdaa0ba263…Open
OBJhollow-ring-30mm.obj15,905 Bd4e157de8a038012…Open
GLBhollow-ring-30mm.glb9,992 B9afa6978f1955ca6…Open
3MFhollow-ring-30mm.3mf5,035 B81c67c0514e6c525…Open

File conventions

STL and OBJ coordinates are millimetres with Z up (neither format stores units). The 3MF declares millimetres. The GLB is in metres with Y up, as glTF requires; opened in the Studio it reads back as the same millimetre size. Licence: CC0 1.0 — use, modify and sell without attribution.