Rendered by the 3DA.XYZ viewport from the published 3MF.
Measured from the file
Size (X × Y × Z)
61.29 × 62.18 × 23.2 mm
Triangles
19,200
Unique vertices
9,600
Volume
4,605.7 mm³ (4.61 cm³)
Solid PLA mass
≈ 5.7 g if printed solid in PLA
Surface area
5,873.4 mm²
Euler characteristic
0
Mesh check
Watertight, consistently oriented
Tips and uses
Look at it in x-ray mode in the Studio to follow the strand.
Download in any format
The 3MF is the master file (millimetres, compressed, 226 KB, SHA-256 3bd8438d6fde2620…). Other formats are converted on your device from the same geometry:
Generated by the open 3DA.XYZ generator with knot: kind = 3-7, size = 30, tube = 3.2, samples = 600, sides = 16. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.