Project
Skip to content

Original 3D model · Chess set · CC0

Chess bishop

A 67 mm bishop with a mitre bead, made by revolving a smooth profile around its axis — the same way a lathe turns wood.

Render of the Chess bishop
Rendered by the 3DA.XYZ viewport from the published 3MF.

Measured from the file

Size (X × Y × Z)
29.19 × 29.19 × 67.22 mm
Triangles
12,160
Unique vertices
6,082
Volume
11,227.2 mm³ (11.23 cm³)
Solid PLA mass
≈ 13.9 g if printed solid in PLA
Surface area
4,027.6 mm²
Euler characteristic
2
Mesh check
Watertight, consistently oriented

Tips and uses

  • Print upright with no supports; add a felt pad underneath.
  • See how revolving works in procedural modeling.

Download in any format

The 3MF is the master file (millimetres, compressed, 96 KB, SHA-256 8f1f4d844726d992…). Other formats are converted on your device from the same geometry:

3MF

How it was made

Generated by the open 3DA.XYZ generator with chess: piece = bishop, segments = 64. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.