Project
Skip to content

Original 3D model · Home & desk · CC0

Coaster with rim

A 90 mm coaster with a 4 mm raised rim to catch drips.

Render of the Coaster with rim
Rendered by the 3DA.XYZ viewport from the published 3MF.

Measured from the file

Size (X × Y × Z)
90 × 90 × 4 mm
Triangles
1,024
Unique vertices
514
Volume
14,357.6 mm³ (14.36 cm³)
Solid PLA mass
≈ 17.8 g if printed solid in PLA
Surface area
14,376.9 mm²
Euler characteristic
2
Mesh check
Watertight, consistently oriented

Tips and uses

  • Prints in about an hour at 0.2 mm layers.

Download in any format

The 3MF is the master file (millimetres, compressed, 9 KB, SHA-256 a2e769579da09920…). Other formats are converted on your device from the same geometry:

3MF

How it was made

Generated by the open 3DA.XYZ generator with coaster: diameter = 90, rim = 3, height = 4, floor = 2. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.