Project
Skip to content

Original 3D model · Cookie cutters · CC0

Flower cookie cutter

A six-petal flower, 70 mm across, with a 1 mm cutting blade 15 mm tall and a 4 mm flange for comfortable pressing.

Render of the Flower cookie cutter
Rendered by the 3DA.XYZ viewport from the published 3MF.

Measured from the file

Size (X × Y × Z)
78 × 69.67 × 15 mm
Triangles
2,880
Unique vertices
1,440
Volume
5,847.3 mm³ (5.85 cm³)
Solid PLA mass
≈ 7.3 g if printed solid in PLA
Surface area
10,510.0 mm²
Euler characteristic
0
Mesh check
Watertight, consistently oriented

Tips and uses

  • Print blade-up: the flange sits flat on the bed, so no supports are needed.
  • Food contact: use a food-safe filament and treat prints as single-season.
  • Change the size or wall in the cookie cutter generator.

Download in any format

The 3MF is the master file (millimetres, compressed, 21 KB, SHA-256 30292deecab7382b…). Other formats are converted on your device from the same geometry:

3MF

How it was made

Generated by the open 3DA.XYZ generator with cutter: shape = flower, size = 70, wall = 1, height = 15, flange = 4, flangeHeight = 2. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.