Project
Skip to content

Original 3D model · Cookie cutters · CC0

Hexagon cookie cutter

A six-sided cutter that tiles with no waste, 70 mm across, with a 1 mm cutting blade 15 mm tall and a 4 mm flange for comfortable pressing.

Render of the Hexagon cookie cutter
Rendered by the 3DA.XYZ viewport from the published 3MF.

Measured from the file

Size (X × Y × Z)
67.55 × 78 × 15 mm
Triangles
72
Unique vertices
36
Volume
4,082.9 mm³ (4.08 cm³)
Solid PLA mass
≈ 5.1 g if printed solid in PLA
Surface area
8,060.6 mm²
Euler characteristic
0
Mesh check
Watertight, consistently oriented

Tips and uses

  • Print blade-up: the flange sits flat on the bed, so no supports are needed.
  • Food contact: use a food-safe filament and treat prints as single-season.
  • Change the size or wall in the cookie cutter generator.

Download in any format

The 3MF is the master file (millimetres, compressed, 2 KB, SHA-256 6e082de58087b6a8…). Other formats are converted on your device from the same geometry:

3MF

How it was made

Generated by the open 3DA.XYZ generator with cutter: shape = hexagon, size = 70, wall = 1, height = 15, flange = 4, flangeHeight = 2. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.