Skip to content

Rendered by the 3DA.XYZ viewport from the published 3MF.
Original 3D model · Cookie cutters · CC0
Star cookie cutter
A rounded five-point star, 70 mm across, with a 1 mm cutting blade 15 mm tall and a 4 mm flange for comfortable pressing.

Measured from the file
- Size (X × Y × Z)
- 70.55 × 74.18 × 15 mm
- Triangles
- 2,400
- Unique vertices
- 1,200
- Volume
- 5,218.4 mm³ (5.22 cm³)
- Solid PLA mass
- ≈ 6.5 g if printed solid in PLA
- Surface area
- 9,460.0 mm²
- Euler characteristic
- 0
- Mesh check
- Watertight, consistently oriented
Tips and uses
- Print blade-up: the flange sits flat on the bed, so no supports are needed.
- Food contact: use a food-safe filament and treat prints as single-season.
- Change the size or wall in the cookie cutter generator.
Download in any format
The 3MF is the master file (millimetres, compressed, 20 KB, SHA-256 e9cc59fd4803e5fc…). Other formats are converted on your device from the same geometry:
How it was made
Generated by the open 3DA.XYZ generator with cutter: shape = star, size = 70, wall = 1, height = 15, flange = 4, flangeHeight = 2. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.