Project
Skip to content

Original 3D model · Math & geometry · CC0

Gyroid lattice cube

A 30 mm cube of gyroid — the triply periodic minimal surface many slicers use as infill — extracted from its implicit equation.

Render of the Gyroid lattice cube
Rendered by the 3DA.XYZ viewport from the published 3MF.

Measured from the file

Size (X × Y × Z)
28.4 × 28.4 × 28.4 mm
Triangles
102,300
Unique vertices
51,044
Volume
12,051.8 mm³ (12.05 cm³)
Solid PLA mass
≈ 14.9 g if printed solid in PLA
Surface area
10,039.8 mm²
Euler characteristic
-106
Mesh check
Watertight, consistently oriented

Tips and uses

Download in any format

The 3MF is the master file (millimetres, compressed, 1,192 KB, SHA-256 5e8f31cd00157b00…). Other formats are converted on your device from the same geometry:

3MF

How it was made

Generated by the open 3DA.XYZ generator with gyroid: size = 30, period = 15, thickness = 0.8, res = 60. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.