Project
Skip to content

Original 3D model · Home & desk · CC0

Hexagonal vase

A six-sided vase with a gentle 30° twist and flared lip.

Render of the Hexagonal vase
Rendered by the 3DA.XYZ viewport from the published 3MF.

Measured from the file

Size (X × Y × Z)
66 × 67.26 × 110 mm
Triangles
14,016
Unique vertices
7,010
Volume
364,963.2 mm³ (364.96 cm³)
Solid PLA mass
≈ 452.6 g if printed solid in PLA
Surface area
29,083.2 mm²
Euler characteristic
2
Mesh check
Watertight, consistently oriented

Tips and uses

  • Vase mode or 2 walls with 0% infill.

Download in any format

The 3MF is the master file (millimetres, compressed, 135 KB, SHA-256 73507c2fd697b660…). Other formats are converted on your device from the same geometry:

3MF

How it was made

Generated by the open 3DA.XYZ generator with vase: height = 110, radius = 32, sides = 6, twist = 30, bulge = 0.1, flare = 0.2. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.