Project
Skip to content

Original 3D model · Keychains & signs · CC0

Keychain tag, rounded

A 50 × 24 × 3 mm rounded tag with a 4.5 mm key-ring hole.

Render of the Keychain tag, rounded
Rendered by the 3DA.XYZ viewport from the published 3MF.

Measured from the file

Size (X × Y × Z)
50 × 24 × 3 mm
Triangles
304
Unique vertices
152
Volume
3,458.5 mm³ (3.46 cm³)
Solid PLA mass
≈ 4.3 g if printed solid in PLA
Surface area
2,761.0 mm²
Euler characteristic
0
Mesh check
Watertight, consistently oriented

Tips and uses

  • Pause at 2 mm and switch filament for a two-colour tag.
  • Make your own size in the keychain generator.

Download in any format

The 3MF is the master file (millimetres, compressed, 4 KB, SHA-256 01200678670f65e4…). Other formats are converted on your device from the same geometry:

3MF

How it was made

Generated by the open 3DA.XYZ generator with tag: shape = rounded, width = 50, height = 24, radius = 6, thickness = 3, hole = 4.5. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.