Project
Skip to content

Original 3D model · Gears & mechanical parts · CC0

Knurled knob, 30 mm

A grip knob with 18 rounded ridges and a 6 mm bore for a shaft or bolt head.

Render of the Knurled knob, 30 mm
Rendered by the 3DA.XYZ viewport from the published 3MF.

Measured from the file

Size (X × Y × Z)
29.56 × 30 × 16 mm
Triangles
992
Unique vertices
496
Volume
10,194.7 mm³ (10.19 cm³)
Solid PLA mass
≈ 12.6 g if printed solid in PLA
Surface area
3,143.3 mm²
Euler characteristic
0
Mesh check
Watertight, consistently oriented

Tips and uses

  • Scale the bore with the Studio’s Scale tool for other shafts, or press in a hex nut.

Download in any format

The 3MF is the master file (millimetres, compressed, 9 KB, SHA-256 540da8506837687a…). Other formats are converted on your device from the same geometry:

3MF

How it was made

Generated by the open 3DA.XYZ generator with knob: diameter = 30, grips = 18, height = 16, bore = 6. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.