Project
Skip to content

Original 3D model · Gears & mechanical parts · CC0

Mounting plate, 4 × M4 holes

A 60 × 40 mm plate with four M4 clearance holes on a 48 × 28 mm pattern.

Render of the Mounting plate, 4 × M4 holes
Rendered by the 3DA.XYZ viewport from the published 3MF.

Measured from the file

Size (X × Y × Z)
60 × 40 × 3 mm
Triangles
668
Unique vertices
328
Volume
6,976.5 mm³ (6.98 cm³)
Solid PLA mass
≈ 8.7 g if printed solid in PLA
Surface area
5,395.9 mm²
Euler characteristic
-6
Mesh check
Watertight, consistently oriented

Tips and uses

  • A template for mounting small electronics or brackets.

Download in any format

The 3MF is the master file (millimetres, compressed, 6 KB, SHA-256 fa2aa405eed10d62…). Other formats are converted on your device from the same geometry:

3MF

How it was made

Generated by the open 3DA.XYZ generator with plate: width = 60, height = 40, thickness = 3, holes = [[-24, -14, 4.4], [24, -14, 4.4], [-24, 14, 4.4], [24, 14, 4.4]]. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.