Project
Skip to content

Original 3D model · Home & desk · CC0

Round bowl

A 90 mm hemispherical bowl with a 2.4 mm wall and flat-bottom contact patch.

Render of the Round bowl
Rendered by the 3DA.XYZ viewport from the published 3MF.

Measured from the file

Size (X × Y × Z)
90 × 90 × 40 mm
Triangles
12,288
Unique vertices
6,146
Volume
26,695.7 mm³ (26.70 cm³)
Solid PLA mass
≈ 33.1 g if printed solid in PLA
Surface area
22,957.5 mm²
Euler characteristic
2
Mesh check
Watertight, consistently oriented

Tips and uses

  • Tip: the curve near the rim is an overhang — keep it under about 60°.

Download in any format

The 3MF is the master file (millimetres, compressed, 98 KB, SHA-256 450ad4b344c7307f…). Other formats are converted on your device from the same geometry:

3MF

How it was made

Generated by the open 3DA.XYZ generator with bowl: radius = 45, height = 40, wall = 2.4. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.