Rendered by the 3DA.XYZ viewport from the published 3MF.
Measured from the file
Size (X × Y × Z)
37.37 × 39.29 × 31.79 mm
Triangles
36
Unique vertices
20
Volume
22,281.3 mm³ (22.28 cm³)
Solid PLA mass
≈ 27.6 g if printed solid in PLA
Surface area
4,205.8 mm²
Euler characteristic
2
Mesh check
Watertight, consistently oriented
Tips and uses
Check Euler’s formula in the Studio’s mesh report (it counts triangles, so V − E + F still gives 2).
Print on a flat face; the generator rests one face on the bed.
Download in any format
The 3MF is the master file (millimetres, compressed, 1 KB, SHA-256 e1143e4d736b20fe…). Other formats are converted on your device from the same geometry:
Generated by the open 3DA.XYZ generator with polyhedron: kind = dodecahedron, size = 40. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.