Rendered by the 3DA.XYZ viewport from the published 3MF.
Measured from the file
Size (X × Y × Z)
78.7 × 78.7 × 120 mm
Triangles
18,688
Unique vertices
9,346
Volume
505,076.0 mm³ (505.08 cm³)
Solid PLA mass
≈ 626.3 g if printed solid in PLA
Surface area
34,261.9 mm²
Euler characteristic
2
Mesh check
Watertight, consistently oriented
Tips and uses
Enable spiral/vase mode in your slicer: it prints only the outer wall in one continuous spiral.
Use a 0.6 mm nozzle or wider line width for a sturdier wall.
Download in any format
The 3MF is the master file (millimetres, compressed, 171 KB, SHA-256 29bd0bc485dc4ed7…). Other formats are converted on your device from the same geometry:
Generated by the open 3DA.XYZ generator with vase: height = 120, radius = 34, sides = 8, twist = 90, bulge = 0.25. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.