Project
Skip to content

Original 3D model · Gears & mechanical parts · CC0

Spur gear, 12 teeth, module 2

An involute spur gear: 24 mm pitch diameter, 20° pressure angle, 5 mm bore. Meshes with any module-2 gear in this library.

Render of the Spur gear, 12 teeth, module 2
Rendered by the 3DA.XYZ viewport from the published 3MF.

Measured from the file

Size (X × Y × Z)
27.97 × 27.97 × 8 mm
Gear diameters
pitch 24 · outside 28 · root 19 mm
Triangles
1,584
Unique vertices
792
Volume
3,301.5 mm³ (3.30 cm³)
Solid PLA mass
≈ 4.1 g if printed solid in PLA
Surface area
2,208.7 mm²
Euler characteristic
0
Mesh check
Watertight, consistently oriented

Tips and uses

  • Pair it with the 30-tooth gear at a 42 mm centre distance for a 2.5:1 reduction.
  • Check the numbers in the gear generator.

Download in any format

The 3MF is the master file (millimetres, compressed, 14 KB, SHA-256 34dfa5e841a6605e…). Other formats are converted on your device from the same geometry:

3MF

How it was made

Generated by the open 3DA.XYZ generator with gear: teeth = 12, module = 2, thickness = 8, bore = 5. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.