Project
Skip to content

Original 3D model · Gears & mechanical parts · CC0

Spur gear, 20 teeth, module 2

A 20-tooth involute gear with a 40 mm pitch diameter and 44 mm outside diameter.

Render of the Spur gear, 20 teeth, module 2
Rendered by the 3DA.XYZ viewport from the published 3MF.

Measured from the file

Size (X × Y × Z)
43.98 × 43.98 × 8 mm
Gear diameters
pitch 40 · outside 44 · root 35 mm
Triangles
2,512
Unique vertices
1,256
Volume
9,579.7 mm³ (9.58 cm³)
Solid PLA mass
≈ 11.9 g if printed solid in PLA
Surface area
4,651.6 mm²
Euler characteristic
0
Mesh check
Watertight, consistently oriented

Tips and uses

  • Centre distance to the 12-tooth gear: (24 + 40) / 2 = 32 mm.
  • Print flat; 0.2 mm layers keep the tooth flanks smooth.

Download in any format

The 3MF is the master file (millimetres, compressed, 22 KB, SHA-256 417202fb7e989212…). Other formats are converted on your device from the same geometry:

3MF

How it was made

Generated by the open 3DA.XYZ generator with gear: teeth = 20, module = 2, thickness = 8, bore = 6. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.