Rendered by the 3DA.XYZ viewport from the published 3MF.
Measured from the file
Size (X × Y × Z)
63.98 × 63.79 × 8 mm
Gear diameters
pitch 60 · outside 64 · root 55 mm
Triangles
4,332
Unique vertices
2,156
Volume
16,663.8 mm³ (16.66 cm³)
Solid PLA mass
≈ 20.7 g if printed solid in PLA
Surface area
9,124.5 mm²
Euler characteristic
-10
Mesh check
Watertight, consistently oriented
Tips and uses
Compare its volume with a solid gear of the same size in the Studio.
Gear ratio with the 12-tooth gear: 30 ÷ 12 = 2.5.
Download in any format
The 3MF is the master file (millimetres, compressed, 38 KB, SHA-256 ef085dabf9c81426…). Other formats are converted on your device from the same geometry:
Generated by the open 3DA.XYZ generator with gear: teeth = 30, module = 2, thickness = 8, bore = 8, spokes = 5. Then welded, checked edge by edge and written to 3MF by the same engine as the Studio; the file was read back to confirm identical geometry. Geometry only — no physical print was tested. Licence: CC0 1.0.