Rendered by the 3DA.XYZ viewport from the published STL.
Measured from the files
Size (X × Y × Z)
25 × 20 × 12 mm
Triangles
8
Unique vertices
6
Volume
3,000.000 mm³
Surface area
1,366.039 mm²
Euler characteristic
2
Watertight
Yes — 0 open edges
All four formats agree
Yes
Every figure was read back from each of the four published files by the 3DA.XYZ mesh engine; all four agree. Geometry only — no physical print was tested.
What this model is for
Two triangular ends joined by three rectangles. Its 25 × 20 × 12 mm extents make it a good orientation exercise: which face should sit on the bed?
STL and OBJ coordinates are millimetres with Z up (neither format stores units). The 3MF declares millimetres. The GLB is in metres with Y up, as glTF requires; opened in the Studio it reads back as the same millimetre size. Licence: CC0 1.0 — use, modify and sell without attribution.