Project
Skip to content

Free online 3D viewer · inspector · converter

3D Studio

Open an STL, OBJ, PLY, GLB, glTF or 3MF file to rotate, measure and section it. Holes and flipped faces are highlighted, and you can repair simple problems and export to another format. Everything runs on your device.

Loading…
Drop your 3D file to open it

Starting the 3D view…

Open a file stays on device

Or try an original sample:

Make a shape

Shapes are closed, outward-facing and sit on Z = 0 — ready to export for printing.

Section view
Position 50%

Inside surfaces show in orange, so walls, cavities and wall thickness become visible.

Transform & repair

Edits apply to the exported file. Holes and self-intersections need a modeling program to repair.

Export / convert

Exports contain the geometry you see, in millimetres. GLB is written in metres with Y up, as glTF requires. For many files at once, use the batch converter.

Mesh report

Size (X × Y × Z)
—
Triangles
—
Unique vertices
—
Edges
—
Surface area
—
Enclosed volume
—
Open (boundary) edges
—
Non-manifold edges
—
Flipped-neighbour edges
—
Duplicate faces
—
Separate shells
—
Zero-area triangles
—
Euler characteristic V−E+F
—
Source
—

Is it ready to print?

Open or make a model to check it.

Notes from the file

    How to use the Studio

    1. Open a file. Drop it on the view, or choose it. For glTF with a separate .bin, select both files together. Set File units first if an STL was made in inches or centimetres.
    2. Look around. Drag to orbit, shift-drag (or right-drag) to pan, scroll to zoom. Use Front / Right / Top with Orthographic for true, measurable side views.
    3. Read the mesh report. Size, volume and surface area come from the actual triangles. Red and magenta lines in the view show exactly where any problem edges are.
    4. Cut it open. Section view slices the model along X, Y or Z, so you can see wall thickness, hidden cavities and internal geometry.
    5. Fix and export. Rotate, place on the bed, scale, flip inside-out meshes or remove duplicate faces — then download STL, 3MF, OBJ, GLB or PLY.

    Supported formats

    FormatOpensExportsNotes
    STLBinary + ASCIIBinary + ASCIIGeometry only. No units: choose the unit the file was made in.
    OBJPolygons (ear-clipped)YesFaces only; lines, UVs and .mtl materials are ignored.
    PLYASCII + binary (LE/BE)BinaryMesh faces; point-only scans have no surface to show.
    OFFYes—Simple research format.
    GLBYes, incl. node transformsYesConverted from metres Y-up to millimetres Z-up. Draco/meshopt compression not decoded.
    glTFEmbedded or with .bin— (use GLB)Select the .gltf and its .bin together.
    3MFYes, incl. components & buildYesUnits honoured. Colours and print settings are not carried over.

    Which should you export? For printing, 3MF keeps units and is compact; STL is the most widely accepted. For the web and AR, use GLB. See the format guide and our measured size comparison.

    What the checks mean

    The Studio first joins vertices whose coordinates are bit-for-bit identical, then counts how many triangles use each edge. A healthy closed surface uses every edge exactly twice, once in each direction.

    Open (boundary) edge — red
    Used by one triangle: a hole or an unfinished border. Closed solids should have none.
    Non-manifold edge — magenta
    Used by three or more triangles: fins, internal walls or bodies touching along an edge.
    Flipped-neighbour edge
    Two triangles share the edge but run in the same direction, so one of them faces the wrong way.
    Separate shells
    Groups of triangles that do not share an edge. Several parts in one file are fine; a single solid split into pieces is not.
    Enclosed volume
    Calculated only when the surface is closed and consistent. A negative result means inside-out.
    Euler characteristic
    V − E + F. A closed surface with no handles gives 2 (a cube, a sphere); a ring with one hole gives 0.
    What the checks cannot seeSelf-intersecting surfaces, walls too thin to print, overhangs and clearances need a slicer or CAD tool. Vertices that are very close but not identical are not joined, so a visually closed seam can still report open edges — which is usually worth fixing.

    Mouse, touch and keys

    ActionMouseTouchKeyboard (view focused)
    OrbitDragOne fingerArrow keys
    PanShift-drag or right-dragTwo fingers—
    ZoomScrollPinch+ / −
    ViewsToolbar buttons0 iso, 1 front, 3 right, 7 top

    Privacy and limits

    Your file is read in this browser tab and never uploaded. Samples load from this site. Limits: 256 MB per file and 2 million triangles; above that, browsers run out of memory. The Studio needs WebGL to draw; opening, checking and exporting still work without it.

    The Studio is original open code (MIT licence) with no third-party libraries. Read the mesh engine, viewport and controller source.

    Questions people ask

    Is my file uploaded anywhere?

    No. The Studio reads the file with your browser's File API and processes it in this tab. No file contents are sent to 3DA.XYZ or anyone else, and nothing is stored after you close the page.

    Why does my model show red edges?

    Red lines are boundary edges: edges used by only one triangle, which means the surface has a hole there. Most slicers need a closed surface to know what is inside. Fix holes in your modeling program (Blender: Select → Select All by Trait → Non-Manifold, then fill) or with your slicer's repair tool.

    What do magenta edges mean?

    Magenta marks non-manifold edges shared by three or more triangles — for example two cubes touching along one edge, or an internal wall. The inside/outside of the model is ambiguous there.

    My model is the wrong size. Why?

    STL, OBJ and PLY do not store units. A model drawn in inches but read as millimetres is 25.4× too small. Set File units before opening, or use Scale in Transform & repair.

    The model is lying on its side.

    Some programs use Y as up, others Z. Use Rotate 90° about X to stand it up, then Place on bed, and export again.

    What does “inside-out” mean?

    Each triangle has a front side, set by the order of its corners. If every face points inward the mesh is inside-out and its signed volume is negative. Flip all faces fixes it in one click.

    How big a file can it open?

    Up to 256 MB or 2 million triangles. In our headless-Chrome test, a 1,040,384-triangle binary STL (52 MB) was read and fully checked in 6.5 to 9 seconds across three runs (headless Chrome on a server CPU with software rendering); phones and older laptops are slower.

    Converting lots of files?

    The batch converter turns a whole folder of STL, OBJ, PLY, GLB or 3MF into one format.

    Open the converter