Skip to content
3D Lab · calculator
Layer Height “Magic Numbers”
Calculate the Z distance of one full motor step from your leadscrew lead and stepper, and list layer heights that land on whole steps.
Why whole steps
Stepper motors are most precise at full-step positions. A common T8 leadscrew with an 8 mm lead and a 200-step motor moves 8 ÷ 200 = 0.04 mm per full step, so layer heights of 0.04, 0.08, 0.12, 0.16, 0.20… mm land exactly on full steps, while 0.1 mm does not. Microsteps subdivide the step but are less exact under load. Many slicers already round to these values; this shows why.