Project
Skip to content

3D Lab · calculator

Shrinkage & Scale Compensation

Measure a printed part, compare it with the designed size, and get the exact scale percentage that compensates.

Calculated in your browser. Nothing is uploaded or saved.

Enter values to calculate.

How to use it

Print something large and simple — a 100 mm bar or our 20 × 30 × 40 mm block — measure it with calipers, and enter both numbers. Scale factor = designed ÷ measured. Materials that shrink as they cool (ABS, nylon) need more compensation than PLA. Apply X/Y and Z separately if they differ, and remember that hole sizes are also affected by squish — see hole compensation.