Project
Skip to content

3D Lab · calculator

Resin Print Cost Calculator

Estimate resin volume and cost from the model volume, a support allowance and the price per litre — and what hollowing would save.

Calculated in your browser. Nothing is uploaded or saved.

Enter values to calculate.

Getting the volume

1 ml = 1 cm³. Open the model in the 3D Studio — the mesh report shows its enclosed volume in mm³; divide by 1,000 for ml. Your resin slicer also reports volume including supports. Hollowing large parts saves a lot of resin, but hollow parts need drain holes and careful washing (FDM vs resin vs SLS).